Success Is Measured Many Ways

Standard

Have you ever sort of failed at something but felt like you succeeded? That’s the situation I’m in regarding some jewelry box items I made last week. In the end, I successfully completed the project (which can be a win all by itself sometimes), but the items don’t really measure up to professional caliber. (I’ll show you in a minute!) However, even when projects don’t end up the way I’d hoped/planned/schemed/dreamed, there is still a sense of satisfaction that comes from the DIY mentality.

It all started when I purchased an old secretary a couple of months ago with the intention of turning it into a cabinet for my jewelry. (Trust me, I have lots!) I discovered that keeping all of my stuff in plastic tackle boxes wasn’t really conducive to wearing it. I didn’t take the time to look for just the right necklace and bracelet, I just grabbed my go-to pieces on top. So, I thought if I found a way to make the piecesĀ more accessible, I’d wear more of it. (Seems logical, right?) And what better way to do that than with a piece of beat up old furniture.

Step one ensued – painting. Once that was accomplished, I jumped online to find some jewelry trays to hold my sparkly happiness. Unfortunately, the inexpensive trays were not the right size for my shelves or the drawers below. Sigh. After much searching I did find some trays that would fit the parameters, but they were high end adding up to nearly $200! (To be fair, they were wood with a lovely blue velvet lining – pretty sweet!)

This led to step two – DIY the jewelry trays. (This is the part that isn’t too pretty. You might want to look away!) In the end, I think the plan was good, but the execution lacked finesse. (What can I say, I’m much better with paper and paint than fabric and hot glue.)

Since I didn’t want to fork over the cash for fancy trays, I decided to use whatever I had to create my own. As luck would have it, I had three boxes from Christmas candy what were the perfect size for my shelf. (yeah!) So I covered them in wallpaper scraps and used a couple of stained towels to make the rolls for the rings. Then I covered those in left over felt and turned in the ends. The result was usable, but not particularly professional. (In retrospect, I might have chosen a softer, thinner fabric which would have made the ends much easier to finish.

dscn2459

Here’s how the trays look in the cabinet. I used Command hooks to hang all my necklaces above and removed the extra shelves. I ended up purchasing beading trays to hold my earrings in a drawer below, but how to get the bracelets out of hiding eluded me for awhile. I looked at some of the t-shaped bracelet holders, but they were too tall for the drawer and a little pricey. Then I saw a bracelet tray that basically had “humps” to put the jewelry across but was low enough to fit in the drawer below. So I decided to give those a whirl, too. (Ever the optimist I figured this project had to be better than the ring trays!)

This one is made from a cat food flat (which is about the same size as the earring trays) and toilet paper rolls. Luckily for me, when I was revamping the studio last week I found some batting, which made the job easier. The process was pretty much the same as above with the exception of placing a pad in the bottom of the tray before covering the cardboard rolls and adhering them to the tray. I do think the ends finished a little better since I found some cardboard circles to cover with fabric and act as caps.

dscn2481

Unfortunately, about halfway through the project I had a rather nasty run-in with the glue gun (silly me!). But Lochinvar came to my rescue with burn gel pads which took the sting away pretty quickly, so I finished the tray as the walking wounded. In the end, the pieces were not perfection, but there were several successes here. First, I didn’t have to fork over any extra money since everything was made with scraps. Second, I didn’t have to wait for shipping. (I’m really all about instant gratification.) Third, I had a good time embellishing the story of my wrapped hand at work today, and (finally) I have the pleasure of knowing that I figured out how to do it myself. So I’m calling it a win. I hope when your projects go awry, you’ll still see the bright side. (Hey, that’s why I’m the Cockeyed Colorist!)

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s